Face Calibration with Video Example

Face Calibration

Open the App >> Menu >> SmartCore >> Face Calibration (Bottom Left)

Simply lay the putter face down, slightly raised above a flat surface (You can use a Book to do this), once confirmed you can run the calibration process in the App and after a few seconds the sensor will be calibrated to the face of your putter.

When calibrating the face of the putter, we are looking at calibrating the front leading edge of the putter only, the height or level of the shaft does not matter at this point in time, this will be taken care of during the Lie / Shaft Lean calibration process.

For use in Live Mode, the putter does not have to be exactly 0.0° level… fairly flat is fine, the calibration process will take care of the rest. For those that choose to upgrade to the Elite Tier, and use the Target Mode, it is then suggested to purchase a digital level.

The App Icon will turn from Red to Blue to confirm that Face Calibration has been completed.